01 / Application
Engine-mounted radiators and electrically driven remote coolers for diesel and gas generator sets. Separate LT and HT circuits are arranged around the engine interfaces, with the heat rejection, flow rate and allowable pressure drop taken from the engine manufacturer.
Related equipment
02 / Application
Combined heat and power plants cannot always use all of the recovered heat. A dry cooler rejects the remaining load to ambient air so the engine keeps running at full output whatever the heat demand.
Related equipment
03 / Application
Multi-engine stations in the tens of MW need cooling banks coordinated with the plant layout: air recirculation, pipe routes, noise and maintenance access are reviewed for the whole bank, not one unit.
Related equipment
04 / Application
Inlet air heating and cooling coils keep the turbine output close to its ISO rating when the ambient moves away from 15 °C. Coil geometry, pressure drop and inlet house interfaces are designed together.
Related equipment
05 / Application
Dry coolers for liquid-cooled IT loads and free-cooling circuits. Approach temperature, fan control and redundancy are set at project level with the cooling architecture of the site.
Related equipment
06 / Application
Free-cooling dry coolers that take the load off the chiller whenever the ambient allows. Control sequences, freeze protection and the chiller interface are assessed with the seasonal climate of the site.
Related equipmentSend us the heat duty, the fluid temperatures and flow rates, the ambient conditions and the installation limits. We answer with a design proposal.
